Free National Delivery within South Africa.

Warranty is held directly with Hubble Lithium. Enway Power Solutions does not carry the warranty nor do we accept any liability in the event of any potential warranty claims. 

The warranty is carried by Hubble Lithium directly, warranty terms and conditions are provided below under Hubble Lithium AM-2 Battery Warranty. 

HUBBLE LITHIUM - AM-2 51V 5.5KW

•  Advanced BMS with current limiting function

•  CAN Bus, fully integrates and communicates with leading Inverter brands

•  Excellent high temperature performance

•  High Cycle Life and Service Life

•  RIOT integration ready for cloud monitoring (Optional extra, sold separately) 

•  1C High Performance Lithium battery

•  High Energy Density and conversion efficiency

•  Complete with integrated Battery Management System

•  Compatible with most Inverters and chargers

•  Low self discharge

•  Easy wall mount or shelf rack installation

•  Heavy duty side handles for easy handling and mounting on the wall

•  Built in protection for over-charge, over-discharge & over-temperature

Maximum power draw of 4.8kW.Rated energy is 5.5kWh 

* Due to continuous product improvements, specifications are subject to change without further notice.

Model Hubble AM-2

Rated Capacity (5HR) 100 Ah

Nominal Voltage 51.0 V

Discharge Cutoff Voltage 42.0 V

Equalized Charge Voltage 54.0 V

Max. Continuous Charging Current 100 A

Max. Continuous Discharging Current 100 A

Weight Approx. 42 Kg

Display None

Parallel connection up to 15 packs with full communications

Dimensions (WxDxH) mm 375mm x 145mm x 467mm

Ports 1x CAN-bus, 2x RS-485, 1x RS232

BYD Li-ion Cells

C Rating 1.0 C

Cycle Life @ 1C +/- 3 000 Cycles

Certification CE, UN38.3, GBT31484-2015, GBT31485-2015, GBT31486-2015

Outer Package Material White bake lacquer steel case

Operating Temperature 

• Charging: 0 to +55°C
• Discharging: -20 to +55°C
• Storage: -20 to +55°C
  
  

Protection Electronic Circuit Breaker, BMS Voltage Protection, Current Limiting

Hubble Lithium AM-2 Battery Warranty

This warranty covers the Hubble Lithium AM-2 51V 5.5KWh wall mount lithium series of batteries, which is backed by Hubble Lithium (pty) ltd.

The battery has a 15 year intended design life, however Hubble Lithium (pty) ltd warranty’s that the battery cells should achieve at least 10 years’ service life or deliver at least 3000 charge, discharge cycles as counted by the BMS, which ever event is achieved first.

The warranty period starts from the date of purchase from Hubble Lithium (pty) ltd tax invoice. The customers invoice must reflect the serial number of the unit on the invoice from Hubble Lithium (pty) ltd. The original invoice (digital or printed) must be provided to Hubble Lithium upon a warranty claim.

Warranty Exclusions & Terms and Conditions:

1. The battery is intended to be used for standby backup or daily cycling in UPS and Inverter systems including solar Inverters. Other unintended uses for the battery will lead to the warranty being void.

2. The battery is intended to be used indoors only. Outdoor use will render the warranty void.

3. The batteries must not have not been contaminated with any foreign or corrosive matter.

4. The warranty does not cover damage due to neglect or abuse such as improper installation, freezing, fire, flooding, or any acts of nature.

5. The warranty does not cover surges or spikes from the inverter or charging device that could damage the battery.

6. If the battery or batteries were installed incorrectly and not according to the manual with correct settings it could result in damage. Incorrect installation and setup will invalidate the warranty.

7. Incorrect sizing of the inverter, charger, or solar system can damage the battery and void warranty.

8. Batteries must be provided with a refresh charge every 5-6 months, while in storage, prior to final installation.

9. If placed in storage then the ambient temperature should be no higher than 25 degrees Celsius.

10. Warranty will be void if the firmware or BMS on the device has been deliberately tampered with or to try and reset cycle values or any data for warranty evaluation purposes.

11. If it is found that the battery is being overloaded through large current draws above the intended rating of the battery, which is outside the intended specification parameters, it will lead to the warranty being void.

12. The warranty is non-transferable, and only applies to the original purchaser of the equipment.

13. The warranty will be void if the serial number has been tampered with or has been removed from the device.

14. The battery will not be considered defective unless it fails to deliver 50% or less of its rated capacity during claimed warranty period.

15. If the battery is interconnected or mixed with other non Hubble batteries the warranty is void.

16. Warranty will be void if the installation or commissioning has not been performed by Hubble Lithium (pty) ltd, or an authorised installer.

17. In the event that the battery needs to be relocated it must be disconnected, moved and reinstalled by an authorised Hubble Lithium reseller or installer.

18. If the battery has been opened or serviced by any person other than Hubble Lithium (pty) ltd.

19. If the battery has been short circuited.

20. If the battery is damaged due to incorrect or improper installation or negligence or excessive wear and tear.

21. If the battery charge voltages are incorrectly set and results in the BMS going into Over Volt Protection.

22. If the Inverter damages the battery due to voltage spikes or overloading the battery or incorrect DC voltages are applied to the battery, then the warranty is immediately void.

23. If the inverter/charger used on the battery is out of specification or incorrectly sized for the battery.

24. Installer/Client is to ensure that that the batteries are fully charged at least once every 5 days to enable the BMS cell balancer to activate and performance cell balancing. Cell balancing can take up to a few hours. This is a necessary step to condition, balance and protect the cells. The cell balancer only activates on 100% charge. If the balancer does not activate for an extended period, then the cells could eventually become unbalanced and can cause undercharged cells to degrade in performance and could result in eventual cell cycle life being greatly reduced. Cell cycle life or performance in these scenarios cannot be guaranteed and can void the warranty.

25. Any damage to the battery caused by peripheral electrical equipment.

The integrated BMS module is designed to last over 15 years, however a standard 3 year warranty is provided for the BMS and all related probes and sensors.

The operating temperature for the battery is designed to be 0 to +55 degrees Celsius, however it is recommended to keep the battery below 25 degrees Celsius to maximise the design life and life cycle of the battery. The cycle life is negatively affected by temperatures above 25 degrees and cannot be guaranteed if the battery is operated in temperatures exceeding 25 degrees Celsius.

The Hubble battery is fully integrated and contained and is thus non serviceable and not intended to be opened by anyone except authorised service centres. If it has been found that the unit has been tampered with or has been opened or attempted to be opened, the warranty will immediately be void.

In the event that the battery cannot be serviced or repaired, a prorated warranty will apply. Any repairs or replacement parts will not extend the original warranty period.

Warranty claims process:

In the event of a possible warranty claim, the following steps should be taken:

1. Contact your authorised reseller and advise them of the issue.

2. The end-user must send or arrange with end user to send the battery to one of our service centres.

3. The service centre will evaluate the battery and validate if a claim is substantiated.

4. The service centre might request additional information, like site and install location or a site visit etc. from the client.

5. If a claim has been validated, repairs and servicing of the battery will be performed.

6. Any replaced parts will become the property of Hubble Lithium (pty) ltd.

7. It is for the end-user to arrange delivery and collection of the unit.